PVC PVG Solid Woven Belt-PVC PVG Solid Woven Belt-SHANGHAI E-STAR GROUP LTD.-

HOME >

Converyor Belts >

Steel cord conveyor belts
Chevron Conveyor Belt
Chemical resistant conveyor belt
EP/NN/Cotten fabric Belt
Cross stabilized belt
Light Duty PVC belt
Foodstuff conveyor belt
Endless conveyor belts
Flat Rubber Belts
Heat Resistant Conveyor Belts
Oil Resistant Conveyor Belts
Flame Resistant Belt
Cold Resistant Belt
PVC PVG Solid Woven Belt
Cross Rigid Conveyor Belt Rip
Bare Back Conveyor Belting
Pipe Belting
Sidewall conveyor belt
Elevator Conveyor Belting
Fabric impression belt
Rough Top Conveyor Belt

PVC PVG Solid Woven Belt

Applications & features:

Especially suitable for material conveying at inflammable of underground coal mines.

The fabric is high in strength, with low elongation, light carcass, shock resistant, anti-tear and good in trough ability.

PVC Solid Woven Conveyor Belt:

Suitable for applications in dry conditions at a slope angle of no greater than 16 degrees.

Cover thickness can be from 0.5 to 4 mm.

Nitrile Covered PVG type:

Suitable for applications at a slope angle of less than 20 degrees, thickness can be 1 to 8 mm.

Resistance to wetness, slip, low temperature and wear resistance of the belt.

Standards: MT914, BS3289 and HG2805

Technical Specifications For Reference

Type		680s	800s	1000s	1250s	1400s	1600s	1800s	2000s	2500s	3150s	3400s
MinTensile Strength(N/mm)	Warp	680	800	1000	1250	1400	1600	1800	2000	2500	3150	3400
MinTensile Strength(N/mm)	Weft	265	280	300	350	350	350	—	—	—	—	—
Min Elongation at Break(%)	Warp	17	15	15	15	15	15	15	15	15	15	15
Min Elongation at Break(%)	Weft	18	18	18	18	18	18	18	18	18	18	18
Recommended thickness(MM）		7.5	8	8.5	9	9	9	9	9	9	9	9
Recommended Cover thickness(MM）	PVC	1.5+1.5	1.5+1.5	1.5+1.5	1.5+1.5	2.5+1.5	2.5+1.5	3+2	3+2	3+2	basad on conveyor systems
Recommended Cover thickness(MM）	PVG	1.5+1.5	1.5+1.5	1.5+1.5	1.5+1.5	2.5+1.5	2.5+1.5	3+2	3+2	3+2	basad on conveyor systems

HOME >

Converyor Belts >